- 1/2Hp 240v motor
- Water Kit complete with taps and click-hose fitting/pressure reducer.
- 1 x #80 flat end plate for coarse grinding and shaping (right hand thread)
- 1 x #360 Grit 6" x 1.5" Auscut Hard Textured Diamond Wheel for last shaping before sanding
- 1 x #600 Grit 6" x 1.5" Auscut Soft Resin Bond Diamond Wheel for medium sanding
- 1 x #1200 Grit 6" x 1.5" Auscut Soft Resin Bond Diamond Wheel for fine sanding
- 1 x #3000 Grit 6" x 1.5" Auscut Soft Resin Bond Diamond Wheel for pre-polish
- 1 x Spin on Lortone end plate with rubber and felt disc for polishing (left hand thread).
- 250 grams cerium oxide to use on the Felt as pinal polish
- Small Footprint 560mm wide x 600mm deep x 280mm high (allowing for Motor, approx 15kg )
If you cant quite run to the cost of a full 6 wheel arbor, this is an excellent alternative - a bit cheaper but still has all the steps you need to complete a stone without changing belts or wheels. You will be working right to left on this set-up.
Be The First To Review This Product!
Help other Aussie Sapphire users shop smarter by writing reviews for products you have purchased.