Header Ad

Shop by Category

Testimonials

Everything is good. Thanks again for the best service. Hope you had a great holiday
Read More ->


Sponsors


6" x 6 Wheel COMPLETE Stainless Steel Lortone BA66 Cabbing Arbor




AUD $1995.00


Log In to be able to add this product to your Wish List.

14 Units in Stock


  • Description
  • Reviews

NEW 2015 MODEL  BA66 STAINLESS STEEL -  the popular 6 wheel arbor is now even better with a Larger Splash Shield which comes further down the Wheels to reduce Splash.

Also now features Heavy Duty Cast Greasable Bearing Housing and quality Stainless Steel for maximum durability.
 
Complete Plug in and use!
 
Complete Ready to use with :
  • 1/2Hp 240v motor
  • Water Kit complete with the Larger 4lt Stainless Steel gravity feed tank and taps.Tank Requires to be screwed to the Bench with screws supllied. (NB Picture shows the Small Lortone Tank not our Bigger Tank Supplied)
  • (contact us if you need a different water set up)
  • 1 x #100 Grit 6" x 1.5" Auscut Hard Textured Diamond Wheel 
  • 1 x #220 Grit 6" x 1.5" Auscut Hard Textured Diamond Wheel 
  • 1 x #280 Grit 6" x 1.5" Auscut Soft Nova type Diamond Wheel 
  • 1 x #600 Grit 6" x 1.5" Auscut Soft Nova Type Diamond Wheel 
  • 1 x #1200 Grit 6" x 1.5" Auscut Soft Nova type Diamond Wheel 
  • 1 x #3000 Grit 6" x 1.5" Auscut Soft Nova Type Diamond Wheel 
  • 1 x 6" Spin on end Plate with Felt and Rubber R/H (For Polish with Oxide)
  • 1 x Cerium Oxide Polish (250 grams of Standard cerium polish)
  • 1 x Plastic Work Apron
 
NOTE: as per photo, we usually set these up with the two hard diamond wheels closest to the centre as this makes the machine run smoother.

The BA66 Stainless arbor is a great way to get into cabbing with a reliable and durable machine.

If you hate having to replace equipment due to rust or breakage, you’ll appreciate the stainless steel construction of this new Arbor!  Precision cut from corrosion resistant 18/8 grade stainless steel with 3/4” stainless steel shaft.  These are the most durable arbors you can buy!
 
Fully fitted and Test Run in our Workshop.
 
This setup is suitable for opal cutting or general cabbing but these Arbors have many other uses other than Lapidary - suitable for any grinding operation that uses wheels.
 
NOTE ON SHIPPING:  this item is too large/heavy to go by post. Shipping will be via Star Track Express courier only.
BEWARE of some Dealers selling Chinese made copies of the USA Made Lortone BA-66.  We have seen samples of these copies and have rejected them as inferior in many ways.  Although they are cheaper for us to buy, we sell ONLY genuine Lortone machines 

 

Be the first to write a review.  Write a Review.

Customers who bought this product also purchased...