7" Portable Trim Saw to cut Stone/Tile/Ceramic/Glass

Customise Your Purchase

7" x 0.032" x 5/8" Electroplated Di

$70.00

QTY

7" x 0.032" Silver Series Diamond Blade

$85.00

QTY

Economy Notched Rim Blade [Bore Size: 5/8 inch] [S

$20.00

QTY

7 inch (180 mm) x 0.030" x 5/8" Ukam Sma

$140.00

QTY

Supplied as standard with tile blade and electroplated lapidary blade - adjust options above to upgrade or add the lapidary blade to sintered continuous rim blade.

Note cutting depth (approx 30mm) - suitable for trimming facet rough or small opal or cabbing rough.

Specifications:

Powerful 560 Watt Motor
Voltage 230V / 50Hz with Australian 3 pin plug
Depth of Cut - 30mm (blade protrudes 34mm from saw table).
7" x 0.032" Electroplated Blade included as standard - adjust options above to upgrade (sintered continuous rim) or add blades (eg. thin 0.020" notched blade).
Arbor - 5/8"
Includes rip fence and angle guide (adjustable from 0-45°)
Table lifts up to cut 15°, 30° or 45° bevels on tile or glass.
Compact footprint - 39 x 40 cm (L x W). Weight is 8kg.
Saw Height - 16cm
Suitable for cutting stone, tiles or glass
Handy carry handle. Rip fence and power cord stows underneath the saw.
Full 12 months Warranty by Aussie Sapphire

Durable, portable & lightweight. Direct drive, induction motor, speed 3,000 rpm for quiet operation and reliability. Self-contained water reservoir for cooling the blade with overflow drain to prevent overfilling reservoir.

Adjustable right cutting table can be positioned at 15º/30º/45º angles for precision corner joints. Built-in measuring guides for precision cuts - 0-45º angles guide & rip guide are included. Saw is compact but there is no raised edge around the saw table to allow for cutting oversize material (eg. glass slabs or rods that extend beyond the table).

NOTE: this saw is produced exclusively for Aussie Sapphire and has some advantages over the standard tile saw found in most hardware shops - the slot on the saw table is thinner making it safer to hand trim small rough and the shaft size is 5/8" in contrast to the more standard 22.2mm (7/8") which gives you more choice in blade type.

(480)

SKU	480
Shipping Weight	8.5000kg
Shipping Width	0.420m
Shipping Height	0.200m
Shipping Length	0.420m
Shipping Cubic	0.035280000m3

Great saw, great service

By: Richard on 3 December 2024
I bought this saw to cut up natural whetstones of 3-5 Mohs hardness. Though pretty soft they are sedimentary, a little brittle, and prone to fracturing along layer cracks. With the 0.032" electroplated blade I have had no mishaps and no chipping along the edge of cuts, even with fairly ambitious thin cuts. Very pleased with this saw, and with the efficient and friendy service I got from the Aussie Sapphire team. Thumbs up!

(5)

my first saw

By: Tracy on 25 August 2023
This is a fantastic economical saw, especially for beginners like me. It was easy to assemble and operate, I love it

(5)

Great Saw 2

By: Allan on 5 September 2022
A great economical saw, I find it just right for breaking down small rough stone and trimming and shaping of slabbed material

(5)

Great saw

By: michael on 27 August 2022
Perfect for sawing opal .I did get some spraying of water but I think I may have overfilled the water.All up great value and does a good job

(5)